Phil Hoggett
Aylesbury,Buckinghamshire
Summary
An accomplished professional bringing over 40+ years’ experience that includes working in the Oil & Gas & Nuclear sector in senior Quality Control and Quality Assurance roles. Motivated and results-focused with a proven track record in saturation diving, senior welding/inspection and coatings, across the oil & gas and Nuclear industry. Demonstrates full knowledge of health & safety protocol and experienced following company safety regulations and contributing to a safe working environment. Diligent and meticulous, with the ability to thrive in a demanding environment, while also being naturally self-motivated with lots of energy and enthusiasm.
Overview
1
1
Certification
44
44
years of professional experience
Work History
Client Quality Manager in Supply Chain
COSTAIN
04.2025 - Current
- Carrying out surveillance visits to Project suppliers and overseeing the supplier and contractors inspector.
- Ensuring if NCR’s are issued they are fully justified and if so push them through the system to closure after 1 month.
- Advise and help the supplier resolve issues where possible and required.
- Review LTQR’s and any other relevant documents that are tabled.
- Compile reports and present them to the client.
- : Please note this was a nuclear project therefore I cannot go into detail due to signing NDA & security clearance
(QML) Quality Management Lead
EDF
09.2024 - 02.2025
- Ensured that the best interests of the client were met as Client site Quality Engineer monitoring quality for the Nuclear Island.
- Reviewed documents including WPQR, LTQR’s, FUD’s, and ITP’s Inspection Check Lists.
- Conducted Walkdowns to ensure quality, and addressed client requests and inquiries.
- Played a key role in an investigation into how an accumulator was fitted by a different company, how this arose, and why bolts were removed from an already installed accumulator to install in the one fitted by the incorrect company.
- Inspected welding issues and identify resolutions.
- Supported with the reviewing and assisting the supplier to set up documentation to the required standard.
- : Please note this was a nuclear project therefore I cannot go into detail due to signing NDA & security clearance
Quality Lead
Fluor
03.2024 - 09.2024
- Prepared project inspection documents and as well as an inspection strategy.
- Remained open and flexible regarding travelling including visiting a chiller manufacturer in Denmark to vet the inspector and ensure progress was as reported.
- :Please note this was a pharmaceutical project therefore I cannot go into detail due to signing an NDA
Principal Source Inspection Specialist
McDermott
03.2023 - 09.2024
- Successfully ensured full compliance on major packages Produced Water Treatment (PWT), Lake water Treatment (LWT), Separators, Coalescers & Internals, working on the Tilenga Project.
- Produced and reviewed documentation including daily progress reports.
- Organise inspectors to visit suppliers.
- Review supplier ITP’s and other documentation.
- Visit problematic suppliers, investigate the issues and worked to find resolutions for some very serious welding issues on 17 vessels at one supplier in Dubai and 6 at another supplier in China.
(QML) Quality Management Lead
EDF
01.2022 - 01.2023
- Monitored and oversaw quality for the Nuclear Island as Client Site Quality Engineer.
- Provided feedback and lessons learned in daily progress meetings.
- Review suppliers documentation.
- : Please note this was a nuclear project therefore I cannot go into detail due to signing NDA & security clearance.
Senior Client Inspector
Bureau Veritas
01.2021 - 12.2021
- Successfully managed and coordinated inspection activities working on various packages on site and in the supply chain.
- : Please note this was a nuclear project therefore I cannot go into detail due to signing NDA & security clearance
Senior Client Inspector
Stork
01.2021 - 12.2021
- Headed the inspection activities of MSSS Waste Retrieval 3m3 Waste Containers, as Client resident inspector based at Stainless Steel Metalcraft (Chatteris) Ltd.
- Reported on project progress including reviewing and signing off LTQR’s.
- :Please note this was a nuclear project therefore I cannot go into detail due to signing NDA & security clearance
Senior Client Quality Engineer & Inspection Coordinator
Fluor UK
01.2015 - 12.2020
- Executed quality control standards throughout areas of the project as Quality Engineer/Inspection Coordinator.
- Led and organised a large team of inspectors at various locations throughout the UK and globally.
- Chaired Pre Inspection Meetings (PIM’s) at various suppliers throughout the world.
- Successfully delivered key projects from inception to completion aligned with ROK directives.
- Complied with health and safety requirements at all times to ensure the safety of self and others.
- Conducted supplier capability studies prior to them being awarded contracts.
- Conducted inspector appraisals before they were offered an inspection.
- Carry out inspections of all castings where MPI prods were used, material was sacrificed to check for hardness hot spots, this was carried out by myself, package manager and materials engineer.
- Reviewed control valves MTC’s and observed the material used for valve plug and stem were machined form non-NACE material this caused 149 valves to be taken apart the incorrect material replaced, re-tested and installed back into the modules where they came from.
- Conducted PIM and progress visits on Exxon Mobil, Fast Project as Site Inspector covering vessels, skids, cranes, structural fabrication. control valves, heat exchangers, columns and coalescers.
- Headed inspection activity for a range of PO’s and commodities for the Tengichevroil FGP / MPP / SGE / SGR projects, monitored inspectors.
Senior Client Quality Engineer & Inspection Coordinator
CB&I UK
01.2014 - 12.2015
- Led the implementation of quality control standards throughout areas of the project as Quality Engineer/Inspection Coordinator.
- Provided leadership to a large team of inspectors at various locations throughout the UK and the world.
- Oversaw parts of SQS on the Statoil Mariner project; monitored inspectors, reviewed inspection reports and circulated to the project team.
- Review supplier ITP’s and add intervention points for our project team.
- Travel to Chile to carry out capability of suppliers to ensure they could carry out the required tasks.
Senior QA/QC Inspector
Vetco Gray/GE OIL & GAS
01.2012 - 12.2014
Senior QA/QC Inspection Coordinator
CB&I
01.2012 - 12.2012
Compliance Engineer
SLP
01.2008 - 12.2009
Senior QA/QC Inspection Coordinator
CB&I
01.2008 - 12.2008
Senior Resident Inspector / Expeditor
British Inspection Engineers
01.2007 - 12.2008
Contract Saturation Diver
01.1983 - 12.1996
- Welder inspector carrying out sub-sea construction, inspection and welding work.
Education
PCN Dye Penetrant Inspection Level 2 -
11.2025
PCN Magnetic Particle Inspection Level 2 -
11.2025
PCN Radiographic Interpretation Level 2 -
10.2025
CSWIP 3.1 Level 2 Welding Inspector Level 2 -
09.2025
IRCA – 9001:2015 QMS Qualified auditor -
07.2025
CSWIP 3.2.1 Level 3 Senior Welding Inspector -
06.2026
CSWIP 3.2.1 Level 3 Senior Welding Inspector -
06.2019
CSWIP Welding Quality Control Co-Ordinator -
05.2031
CQP MCQI – Chartered Quality Professional -
05.2025
PT210 Quality In Construction -
04.2025
NACE Level 2 -
03.2024
NACE Level 1 -
01.2015
BSI Quality Management Systems Diploma -
Skills
- Leadership and Management
- Health & Safety
- Quality Management
- Quality Assurance
- Troubleshooting and Problem Solving
- Process Improvement
- Solution Oriented
- Conversant with ISO 9001
- Conversant with ISO 9000
- Conversant with ISO 9004
- Conversant with ASME IV
- Conversant with ASME IX
- Conversant with BSI 5817
- Conversant with AWS D 11
- Conversant with RCC-M
- Conversant with GQAS
- Conversant with ISO 15614
- Conversant with PED
- Conversant with ISO 51614
- Conversant with BS EN 1090
- Quality control procedures
- Risk assessment
- Supplier evaluation
Certification
- CQP MCQI
- Eng.Tech
- Tech.Weld-I
- NACE Level 2
Custom Section
- Xmas trees
- Manifolds and Choke Manifolds
- Tubing hangers
- Sand separators
- EDM’s
- SCM’s
- SDU’s
- UTA’s
- Multi-Phase Flow Meters
- HPU’s
- Welded structures CS and exotic materials
- FAT’s
- Hyperbaric testing of many types of equipment
- HFL witness of construction and testing
- Hydrostatic testing of equipment
- Witness welding of material CS and exotic materials
- Stab plate builds and testing
- STHFL’s Welding and Connections
- Inline corrosion test spools, construction and testing
- Manufacture and testing of ROV tools
- Testing of hydraulic connectors
- Witness PMI and ferrite testing of materials
- Inconel cladding of pipe spools and other items
- Witness testing of SCM test skids
- Testing of various types valves
- Instrumentation panels
- CIMV’s witnessed tested
- Welding trials to find a WPQ that would reduce sigma phase in Super Duplex and Duplex
- Inspecting fabricated structures CS/exotic materials
- MRB review, documentation and ensure full traceability of materials
- Plate girders & pipe supports
- Architectural steel works
- Witness of welding processes and compliance
- Witness NDE processes and compliance
- Pipe mill activity, manufacture of seam welded pipe
- Cladding of pipes/material with Inconel and stelitte
- Witness WPQ tests and welder qualification
- Forged materials
- Cast materials
- Cryogenic testing of valves and inspection
- Valves examined, ball, DBB, butterfly, gate, Needle various sizes and H2S service
- Compressors
- Pulverizing equipment
- Instrumentation panels mechanical
- Pumps various types
- Coatings various including TSA
- Various types of fittings, welded & mechanical
- Load testing
- Inspection of lifting equipment
- HVAC systems & fans
- Pressure vessel fabrication and testing
- Fire deluge systems
- Chlorine dosing meters systems
- Printed circuit heat exchangers
- Fixings for cryogenic and normal service conditions
- Accommodation module SS cladding / blast walls
- Flare stack package
- Zinc coating of plate girders
- Nitrogen booster pumps
- Nitrogen generators
- Gas compressors
- Various items for Nuclear systems
- Actuated valves with actuators
Professional Development
- Costain Code of Conduct Certificate
- Chartership of CQI
- PT210: Quality In Construction
- BSI: Quality Management System Diploma
- PCQI
- CSWIP Welding Coordinator refresher course
- CSWIP 3.1 Refresher Course
- PCN Dye Penetrant Inspection Course
- PCN Radiographic Interpretation Course
- CCC Underwater Eng., Company Appointment
- Offshore Survival Refresher Course
- Bell Saturation Course HSE Part 2
- Conversion Course to HSE Part 1
- PCN Magnetic Particle Inspection Course
- CSWIP Refresher Course
- Lead Auditor Course
- CSWIP 3.1.U. NDT Refresher Course
- Welding Inspector and M.P.I. Course
- ASME 9-6G Certificate
- Air/Mixed Gas Bell Saturation
References
Upon Request
Timeline
Client Quality Manager in Supply Chain
COSTAIN
04.2025 - Current
(QML) Quality Management Lead
EDF
09.2024 - 02.2025
Quality Lead
Fluor
03.2024 - 09.2024
Principal Source Inspection Specialist
McDermott
03.2023 - 09.2024
(QML) Quality Management Lead
EDF
01.2022 - 01.2023
Senior Client Inspector
Bureau Veritas
01.2021 - 12.2021
Senior Client Inspector
Stork
01.2021 - 12.2021
Senior Client Quality Engineer & Inspection Coordinator
Fluor UK
01.2015 - 12.2020
Senior Client Quality Engineer & Inspection Coordinator
CB&I UK
01.2014 - 12.2015
Senior QA/QC Inspector
Vetco Gray/GE OIL & GAS
01.2012 - 12.2014
Senior QA/QC Inspection Coordinator
CB&I
01.2012 - 12.2012
Compliance Engineer
SLP
01.2008 - 12.2009
Senior QA/QC Inspection Coordinator
CB&I
01.2008 - 12.2008
Senior Resident Inspector / Expeditor
British Inspection Engineers
01.2007 - 12.2008
Contract Saturation Diver
01.1983 - 12.1996