Evan Davies
Merthyr Tydfil
Summary
Motivated and hands-on Multi-Skilled Engineer experienced in maintaining, fault finding, and repairing a wide range of factory equipment including wrapping machines, refrigeration plant and compressors. Skilled in building and wiring control panels, carrying out planned and reactive maintenance, and supporting continuous improvement across production lines. Competent with single and three-phase systems, PLC programming, and electrical testing procedures. Fully trained in health and safety practices, including working at height, confined spaces, lockout/tag out, and fire marshal duties. Reliable, safety-conscious, and focused on developing further within electrical maintenance and automation.
Overview
6
6
years of professional experience
10
10
years of post-secondary education
1
1
Certification
Work history
Multi Skilled Engineer
Baronie UK
Merthyr Tydfil
2024.09 - 2026.05
- Carry out planned preventative maintenance (PPM) on production lines, wrapping machines and other factory equipment to keep machines running smoothly and reduce downtime.
- Attend call-outs for electrical and mechanical breakdowns, fault finding and carrying out repairs on site as required.
- Build and wire control panels for new and existing machinery, working from electrical drawings and wiring diagrams.
- Support repairs on chocolate and toffee wrapping machines, refrigeration plant and compressor systems.
- Replace faulty sensors, motors, switches, contactor and other electrical components to restore equipment safely back to service.
- Use multimeters, insulation testers and other test instruments to check and prove electrical systems.
- Help with modifications and upgrades to control systems to improve reliability and performance.
- Work with both single-phase and three-phase systems, carrying out wiring, testing and installation work.
- Carry out maintenance and repairs on fridge plant, compressors and chilled water systems used in production.
- Use the WorkMate maintenance system to log, track and close out all completed jobs and breakdowns.
- Work safely under permit systems, including working at height and within confined spaces.
- Act as trained Fire Marshal, supporting emergency response procedures and safety drills.
- Record all work completed in maintenance logs and job sheets for future reference.
- Follow safe isolation and lock-off procedures in line with company health and safety standards.
- Support continuous improvement work to reduce downtime and increase machine reliability.
- Work closely with engineers and operators to plan repairs and maintenance around production needs.
- Maintain tools, tidy work areas and help manage spare parts and materials for the maintenance team.
- Continue to learn from senior engineers, gaining experience in PLC fault finding, soft starters, VFDs and automation systems.
Apprentice Engineer
Automation & Control Systems
Merthyr Tydfil
2024.05 - 2024.09
- Wired and assembled electrical control panels, ensuring all circuits were connected and labelled to match wiring diagrams and customer requirements.
- Programmed PLCs, variable speed drives, servos, and HMI screens to perform automation and control tasks as specified by the client.
- Tested completed installations for insulation resistance, continuity, and functionality before commissioning.
- Installed and maintained sensors, motors, and electrical control systems used in industrial machinery.
- Read and interpreted electrical schematics, control drawings, and cable schedules to plan installations accurately.
- Worked safely following company and site health & safety policies, including lock-off procedures and risk assessments.
- Provided hands-on support during fault finding, troubleshooting, and breakdown repairs.
- Used technical drawings and measuring instruments to identify faults, test circuits, and verify operation.
- Communicated effectively with supervisors, engineers, and operators to ensure work was completed safely and efficiently.
- Supported ongoing projects by helping design, build, and test new automation systems.
- Maintained detailed records of work carried out, including test results, cable runs, and equipment used.
- Assisted in upgrading machinery with new electrical systems to improve reliability and performance.
- Developed skills in both hardware wiring and software programming for PLC-based control systems.
- Regularly used tools such as multimeters, cable testers, and PLC programming software (e.g., Siemens, Allen-Bradley, or Mitsubishi).
- Shadowed senior engineers to gain further experience in automation, robotics, and predictive maintenance.
Carpenter and joiner
Wood Wise
Merthyr Tydfil
2020.07 - 2022.05
- Ordered and organised materials, keeping stock levels accurate and recommending reorders when needed.
- Marked and set out layouts for stairs, common rafters, and framework according to drawings and site plans.
- Stained and finished oak casings and hardwood floors to a high standard.
- Installed cabinets, base units, and crown moulding with a clean and precise finish.
- Measured, marked, and cut timber, panels, and other materials accurately to specification.
- Operated cordless drills, hammer drills, and cutting tools safely and efficiently.
- Followed health and safety procedures on-site, helping reduce the risk of accidents and keeping work areas safe.
- Modified and adjusted furniture to meet customer requirements, maintaining strong satisfaction and positive feedback.
- Maintained a clean, tidy workspace and supported company safety standards.
- Shadowed senior staff to develop a wide range of practical and technical skills.
- Used attention to detail and problem-solving skills to complete tasks on time and to a high standard.
- Performed best practices to comply with local building codes and health and safety regulations.
Education
Higher National Certificate - Electrical & Electronic Engineering
Bridgend College
Bridgend 2024.09 - 2026.05
NVQ Level 3 - Electrical Engineering Installation and commissioning
EAL Bridgend College
Bridgend 2022.09 - 2025.09
Level 3 Diploma - Electrical & Electronic Engineering
EAL Bridgend College
Bridgend 2022.09 - 2024.05
Level 2 - Entrant and Entry Controller for Confined Spaces (Medium Risk)
City & Guilds
Bridgend 2025.05 - 2025.05
Level 2 - Essential Digital Literacy Skills
City & Guilds
Bridgend 2023.09 - 2023.09
Level 2 Diploma - Site Carpentry & Joinery
City & Guilds
Merthyr Tydfil 2020.09 - 2022.05
NVQ Level 2 - Site Carpentry & Joinery
City & Guilds
Merthyr Tydfil 2020.09 - 2022.05
GCSEs - Science
WJEC
Aberdare 2020.06 - 2020.06
GCSEs - English Literature
WJEC
Aberdare 2020.06 - 2020.06
GCSEs - Mathematics
WJEC
Aberdare 2021.06 - 2021.06
GCSEs - English Language
WJEC
Aberdare 2020.06 - 2020.06
GCSEs - Art and Design
WJEC
Aberdare 2020.06 - 2020.06
Skills
- Electrical maintenance and fault finding on industrial machinery
- Building and wiring electrical control panels from technical drawings
- PLC programming and basic fault diagnosis (Siemens / Allen-Bradley)
- Installation and testing of motors, sensors, relays, and control circuits
- Working safely with single-phase and three-phase systems
- Reading and interpreting electrical and technical schematics
- Carrying out planned and reactive maintenance (PPM and breakdowns)
- Experience with wrapping machines, refrigeration plant and compressors
- Using Work Mate system to log, track and complete maintenance tasks
- Following safe isolation and lock-off procedures (LOTO)
- Strong understanding of health & safety and safe systems of work
- Teamwork, communication, and problem-solving under pressure
Accomplishments
Achieved NVQ Level 3 in Electrical and Electronic Engineering at Bridgend College.
• Achieved Distinction in Level 3 Diploma in Electrical and Electronic Engineering at Bridgend College.
• Awarded NVQ Level 2 Carpentry and Joinery for outstanding practical performance and attention to detail.
• Successfully progressed onto the HNC in Electrical and Electronic Engineering, showing commitment to ongoing professional development.
• Assisted in the design, build, and wiring of new control panels to improve equipment reliability and production efficiency.
• Trained and appointed as Fire Marshal, supporting site safety standards and emergency procedures.
Certification
- HNC in Electrical & Electronic Engineering 2024-Ongoing
- NVQ Level 3 Electrical Engineering - September 2025
- Level 3 Diploma Electrical Engineering - June 2024
- IPAF MEWP 3A & 3B - July 2023
- Level 2 Confined Spaces - May 2025
- Level 2 Lockout/Tagout (LOTO) - July 2025
- Working Safely at Height Certificate - June 2025
- Level 2 Abrasive Wheels - August 2025
- Level 2 Food Hygiene Certificate - September 2024
- Level 2 HACCP - September 2024
- Fire Marshal Training - October 2025
- NVQ Level 2 in Carpentry and Joinery
- Level 2 Diploma in Site Carpentry
Languages
English
Welsh
References
References available upon request.
Timeline
Level 2 - Entrant and Entry Controller for Confined Spaces (Medium Risk)
City & Guilds
2025.05 - 2025.05
Higher National Certificate - Electrical & Electronic Engineering
Bridgend College
2024.09 - 2026.05
Multi Skilled Engineer
Baronie UK
2024.09 - 2026.05
Apprentice Engineer
Automation & Control Systems
2024.05 - 2024.09
Level 2 - Essential Digital Literacy Skills
City & Guilds
2023.09 - 2023.09
NVQ Level 3 - Electrical Engineering Installation and commissioning
EAL Bridgend College
2022.09 - 2025.09
Level 3 Diploma - Electrical & Electronic Engineering
EAL Bridgend College
2022.09 - 2024.05
GCSEs - Mathematics
WJEC
2021.06 - 2021.06
Level 2 Diploma - Site Carpentry & Joinery
City & Guilds
2020.09 - 2022.05
NVQ Level 2 - Site Carpentry & Joinery
City & Guilds
2020.09 - 2022.05
Carpenter and joiner
Wood Wise
2020.07 - 2022.05
GCSEs - Science
WJEC
2020.06 - 2020.06
GCSEs - English Literature
WJEC
2020.06 - 2020.06
GCSEs - English Language
WJEC
2020.06 - 2020.06
GCSEs - Art and Design
WJEC
2020.06 - 2020.06