Summary
Overview
Work history
Skills
Certification
Timeline
Generic

Alan Fairall

Summary

I started working for Aker Solutions in January 2022 as a mechanical technician, which involved the building of stab plate and couplings where I was required to use mechanical drawings and parts BOM to assembly the items and carry out pressure testing on couplings. During the work, I was crane trained for heavy lifting. I also used laser etcher for part marking components. As required, I worked in the Topside area, where I mechanically assembled electrical enclosures, with the use of engineering drawings and parts BOM, later I carry out wiring the enclosures and cable forming and was IPC 620 and IPC J standard trained. I am HSE and risk aware. Have carried out Fire training, understand and use 5S system and Lean. I work well within a team, a good problem solver / fault finding /diagnostic issues / and quick leaner, I am happy to go the extra mile if required, I will always strive to improve my knowledge within my working environment.

Driven individual with robust foundation in problem-solving and technical aptitude. Proficient in diagnosing mechanical issues and performing repairs, with strong communication skills and collaborative mindset. Committed to enhancing vehicle performance and ensuring customer satisfaction through meticulous workmanship.

Overview

19
19
years of professional experience
1
1
Certification

Work history

Mechanical Technician

Aker Solutions
Winnersh , Berkshire
01.2022 - Current
  • Coupling assembly
  • Stab plate assembly
  • Pressures Testing
  • Electronic enclosure mechanical assembly
  • Wiring and cable forming
  • I started working for Aker Solutions in January 2022 as a mechanical technician, which involved the building of stab plate and couplings where I was required to use mechanical drawings and parts BOM to assembly the items and carry out pressure testing on couplings
  • During the work, I was crane trained for heavy lifting
  • I also used laser etcher for part marking components
  • As required, I worked in the Topside area, where I mechanically assembled electrical enclosures, with the use of engineering drawings and parts BOM, later I carry out wiring the enclosures and cable forming and was IPC 620 and IPC J standard trained
  • I am HSE and risk aware
  • Have carried out Fire training, understand and use 5S system and Lean
  • I work well within a team, a good problem solver / fault finding /diagnostic issues / and quick leaner, I am happy to go the extra mile if required, I will always strive to improve my knowledge within my working environment
  • Ensured machinery efficiency by conducting routine maintenance.
  • Diagnosed technical issues for timely repairs.

Motor Engineer/ Technician/ MOT tester

Angles MOT and serviced centre
Bexhill on sea, East Sussex
05.2016 - 12.2021
  • All kinds of mechanical and electrical repairs to cars, van, motorcycles
  • Mechanical diagnoses
  • Electrical diagnoses

Welding, and fabrication, air conditioning , customer contact ,mot testing recovery, able to work with own initiative or in a team,work to highest standard of job satisfaction ,tyre fitting and geometry checks

Motor Engineer, MOT tester

Vicarys Garage
Battle , East Sussex
01.2006 - 04.2016
  • All kinds of mechanical and electrical repairs to all of vehicles cars and vans, gas welding and mig welding diagnostic electrical and mechanical mot tester class 4, 5,7, customer contact , report problems and give best solutions or cure to rectify

Skills

  • Welding
  • Gear boxes
  • SAP
  • Automotive repair
  • Safety awareness
  • Team work
  • Mechanical maintenance
  • Engineering drawing interpretation
  • Practical
  • Component replacement and repairs
  • Mechanical assembly
  • Health and Safety Compliant
  • Prototype building
  • Compliance adherence
  • Welding techniques
  • Fabrication techniques
  • [Type] testing procedures
  • Hydraulic and pneumatic systems
  • Diagnosis and fault finding
  • Problem solver
  • ISO standards knowledge
  • Mechanical hand and power tools

Certification

Iso620, iso standard pat testing ,crane trained fire safety training mot tester 1,2,4,5,7 just need to complete refresher course, air conditioning trained

Timeline

Mechanical Technician

Aker Solutions
01.2022 - Current

Motor Engineer/ Technician/ MOT tester

Angles MOT and serviced centre
05.2016 - 12.2021

Motor Engineer, MOT tester

Vicarys Garage
01.2006 - 04.2016
Alan Fairall