Phil Cochrane

• Performed comprehensive IMCA R006 audit of three Saab Seaeye ROV systems, utilising advanced assessment techniques and coordinating with OEG while onboard the Ievoli Relume in Den Helder, Netherlands.

• Carry out IMCA R006 audit of a Sub Atlantic Super Mohawk ROV system on behalf of OSC Marine.

Oversee decommissioning preparations aboard DSV Seven Atlantic for Thistle ‘A’ conductor removal.

Coordinate preparation and removal of 15 conductors using diamond wire saw.

• Schedule conductor removal ahead of jacket removal in 2027.

Assisted in decommissioning operations as offshore client representative onboard heavy lift vessel Rambiz.

Supported preparation and removal of structures Hewett 'A', Hewett 'Q', and Hewett 'FTP' in block 48/29.

Helped coordinate activities between HLV Rambiz and HLV Gulliver for main lifts.

Oversaw decommissioning operations on Magnus South F9 and F10 wells disconnection campaign.

• Assisted in overseeing brownfield deep-water construction and commissioning operations on Agogo Integrated West Hub Development campaign.
• Supported FPSO hook-up and LBL array installation processes.
• Facilitated mattress DMA and SDU deployment tasks.
• Aided in BH diver-less subsea connections and EFL & HFL installations and tie-ins.
• Contributed to suction pile PLET manifold and crossing bridge installations.
• Participated in dewatering, pigging and leak testing activities prior to commissioning and final commissioning efforts for first oil.

• Oversee decommissioning operations on the P2, P4, P11 Dumbarton Wells disconnection and P12 Orifice Plate Installation Campaign.

• Oversee decommissioning operations at Thistle ‘A’ & Heather. Riser & Umbilical Cutting & removal. Shallow water Sat Dive operations.
• Vessel: Seven Atlantic

• Act as Client Rep onboard the Island Valiant to oversee Shell’s Wellhead Severance 2024 campaign recovering 8 wells over 3 well sites, Kingfisher, Merganser, & Scoter assets in the UKCS.
• These wells, associated flow bases / protection components were recovered along with debris.
• Comprehensive Debris, PPA, Clear Seabed & As-left surveys were also required.
• Vessel: Island Valiant

• Act as Client Rep onboard the Normand Jarstein.
• Oversee Phase 1 of the EPRD contract for the subsea facilities clearance of the Chestnut North Sea field within the Spirit Energy Facilities decommissioning Project. Mattress Recovery & seabed surveys.
• Oversee Phase 2 of the EPRD contract for the subsea facilities clearance of the Chestnut North Sea field within the Spirit Energy Facilities decommissioning Project. Pipeline & Umbilical cutting & recovery.

Conducted offshore surveys of seabird populations in Morecambe Bay and East Irish Sea.

Assisted in collection of photographic evidence from Calder & Millom West platforms regarding avian colonisation.

• Documented status of nests and presence of chicks.

• Assisted in acting as client tech representative onboard Boka Atlantis.
• Provided technical support during Tern ‘A’ decommissioning work scope.
• Supported flooding flushing disconnection and blanking of production and gas lift pipelines prior to disconnection and recovery.

Assisted in coordination of supply operations for offshore projects.

Supported delivery team with timely interface between contractors and vessel crews.

• Facilitated safe transportation of materials to and from offshore locations.
• Managed complaints with calm, clear communication and problem-solving.
• Maintained clean, safe working environments to eliminate accident risks.
• Achieved service time and quality targets.

• Facilitated client representation aboard C-Odyssey to support safe and efficient near shore diving operations at Moray West Wind Farm.

• Managed inspection programme oversight and client representative onboarding at DeepVision, utilising structured processes to ensure compliance and quality assurance.

• Oversaw client representative onboarding for Skandi Acergy to ensure effective communication and coordination on the Ithaca Athena Jacky & Beatrice 'A' & 'B' decommissioning project using Utrov ROV spread.

Assisted in abandonment of Tartan TS11 wells for Repsol.

Supported plug and lubricate operations for Scoter & Pierce.

• Collaborated with team members to achieve target results.

Facilitated tree removal campaign at Scoter & Pierce CNS for Shell.

• Spearheaded management of ROV fleet and offshore workforce, ensuring effective delivery of ROV equipment and personnel for diverse projects.
  Directed onshore technical project team to provide prompt technical support and spare parts for ROV fleet, optimising costs and timelines.
  Cultivated strong working relationships with all personnel and contractors to facilitate smoother project execution.
  Oversaw development and implementation of new-build ROV specifications and construction initiatives.
  Created comprehensive project plans to guide refurbishment of ROV systems, enhancing operational efficiency.
  Evaluated technical reports and variation orders to guarantee adherence to project standards.

• Managed client liaison on Bleo Holm FPSO to ensure seamless collaboration with Deep Discoverer dive vessel on Blake Infill Project.
  Oversaw installation of spool pieces and conducted Blake IR diagnostics.
  Directed SCM replacement efforts to enhance operational efficiency.

• Coordinated logistics and equipment for boulder removal and relocation operations on Dogger Bank Bravo OWF prior to inter-array cable installation.

• Oversaw decommissioning operations to ensure project compliance and safety standards.
  Managed pipeline cutting and mattress recovery processes effectively.
  Directed grout bag installation to facilitate project objectives.

• Project Engineer on decommissioning operations on Shell Central North Sea (CNS) assets including the Curlew, Goldeneye and Kingfisher subsea infrastructure, mattresses, pipelines, EFL’s etc

Assisted in inspection campaign for pipeline platform and structures in southern sector.

Utilised MBES, TSS440 FMD, CP, and UT readings to gather data.

• Supported leak detection efforts using Oceansense RM leak detection system.

• Assisted in conducting surveys of subsea assets and platforms in Danish sector.
  Supported operations during scour and debris assessments.
  Contributed to maintenance of CP and FMD systems.

Assisted in diamond wire cutting of bifurcated sections of 30” pipelines prior to recovery for metallurgical investigations into pipeline failure.

Supported salvage efforts of displaced and unstable pipeline sections to ensure safety.

• Performed dredging operations using diamond wire saws and hydraulic shear cutting techniques.

Conducted Hornsea Four offshore seabird surveys in southern North Sea UK special area of conservation to assess potential compensation options.

Collected photographic evidence from platforms regarding avian colonisation, including nest status and presence of chicks.

• Evaluated potential disturbances from current oil and gas activity due to vessel and human proximity.

Conducted mooring chain inspections for Foinaven Petrojar FPSO during 2021.

Executed underwater hull and mooring inspections on Petrojar Foinaven prior to off stationing in 2022.

Utilised Weleptega RCIS tool for cleaning mooring ropes.

• Delivered successful subsea spool installations and tie-in projects on time.
  Achieved seamless integration of four spools to Tolmount platform (NUI) through strategic management.
  Ensured leak-free installations with rigorous testing prior to client transition.
  Realised effective seabed stabilisation with precise mattress installations.

Assisted in preparing subsea facilities for handover to commissioning team following pre-commissioning by installation contractor.

Supported implementation of pre-commissioning activities such as de-watering, flushing, and cleaning in compliance with relevant procedures.

Helped coordinate communication between project teams, subcontractors, and third-party contractors regarding work status and potential issues.

Assisted in replacement of rudder stock seals for improved vessel performance.

Supported thruster inspections and photogrammetry for equipment integrity verification.

• Facilitated removal and installation of fire pump sea chest blanking plates.
• Contributed to thruster anode replacement for enhanced operational efficiency.

• Achieved high build quality for submarine rescue vehicles through effective liaison with QA managers.
  Ensured adherence to PD5500:2018 and ASME PVHO-1 specifications, leading to successful certification.
  Delivered projects meeting rigorous international standards, enhancing client satisfaction.

• Oversaw platform de-commissioning and removal projects to ensure safety and efficiency.
  Executed diamond wire saw operations for precise cutting of platform legs before lifting and recovery.
  Acquired extensive knowledge in subsea structure removals and heavy lift operations, contributing to smooth project execution.

Supported project teams as site representative for construction of three submarine rescue vehicles.

Facilitated health, safety, and environmental culture to ensure adherence to best practices.

Assisted in coordinating with clients' QA managers to ensure compliance with welding specifications.

• Assisted in conducting general visual inspections of assets.
• Supported quality assurance and quality control activities for inspection data.
• Aided in the management of third-party inspection equipment.

• Achieved successful completion of pre-commissioning tasks, enhancing project efficiency.
  Delivered effective de-watering, flushing, pigging, and hydrotesting processes for PL4549 pipeline project.
  Secured readiness of pipeline infrastructure, facilitating timely project deployment.

Managed offshore operations of construction vessel.

Supported the promotion of superior HSE culture, aligning with BP's standards.

Acquainted with BP SAS & SOM systems.

Executed surveys and removal tasks for pipeline and cable lay in West of Shetland fields.

Assisted in installation of rock placement and scour protection.

Provided subsea construction inspection repair and maintenance support.

Participated in foundation installations and manifold setups.

Contributed to jumper tie-ins and metrology tasks.

Conducted mooring chain inspections using advanced tools.

Engaged in pipeline inspection programmes from 2016 to 2019.

Facilitated riser replacements and wire saw cutting operations.

• Assisted in the disconnection of EFL and FTP during Quad 204 field suspension.
• Supported jumper deployment and fibre optic cable installation.
• Participated in WOSP's tee tie-in assembly and valve operations.
• Engaged in leak investigations and tether replacements.
• Contributed to pipeline inspection programmes using advanced technology.
• Involved in subsea well intervention projects.
• Aided in choke change-outs and flushing operations.
• Executed anode installations for Andrew project.
• Facilitated annual structures and pipeline inspections.

• Coordinated inspections and tests of metrology spools to verify alignment with technical specifications during Jasmine development tie-in.

• Assisted in utilisation of Sims data recording system.
• Supported project phase 2 for Centrica CEU/CSL ROV IRM in 2012.
• Contributed to data management tasks as part of team efforts.

• Executed structural surveys and inspections for BP campaigns in the North Sea.
• Assisted with CP and UT readings to ensure equipment integrity.
• Supported operations aboard ROVSV Deep Vision under contractor DeepOcean.

• Conducted inspections of shell structures using ROV technology.
• Assisted in CP and GVI surveys to support project objectives.
• Operated Cougar 1109 ROV in North Sea for Shell client.

• Assisted with survey work on offshore wind farm at Scroby Sands.
• Supported analysis of export and inter-array cables to assess site conditions.
• Contributed to data collection efforts crucial for project planning.

• Assisted in inspection of thirteen un-piggable pipelines.
• Utilised EMAT GUL Nautilus and manual UT 'A' methods for subsea corrosion detection.
• Supported mapping techniques for non-destructive testing.

• Achieved thorough annual inspections of BPN platform and pipeline, enhancing operational reliability.
  Identified and rectified issues during inspections, leading to improved safety standards.
  Produced comprehensive inspection reports that informed strategic decision-making.

• Pre-commissioning, flushing, pigging, and hydrotest of Islay 10x6 ETH-PiP lay.
• Pipe-in-pipe pressure testing.

02/11/11 to 18/11/11 Devenick Pre-commissioning, Pipe in Pipe pressure testing.

Contractor: Fugro Location: Devenick, North Sea. Vessel: Skandi Carla

3/10/11 to 20/10/11 BP Structures Annual Inspection. ROV CP, FMD, GVI & CVI of BP Valhall, Hod & Harding Structures. Andrew Anode Installation. Harding STL buoy Transponder Replacement. Forties pipeline UXO removal. Preparation, HIRA, planning and removal of Unexploded 0rdanance from one of the UK’s main oil pipelines

Contractor: DeepOcean Location: North Sea & Norway. Vessel: Volstad Surveyor

17/8/11 to 14/9/11 BP 2011 Pipeline GI & GVI Inspection program

Contractor: DeepOcean Location: North Sea Vessel: Northern Canyon

• Assisted with replacement of top chain sections for Schiehallion FPSO mooring chain project.
• Supported contractor Oceaneering throughout project execution in West of Shetland.
• Monitored vessel Maersk Attender operations to ensure compliance with project requirements.

• Conduct de-oiling operations on Bibby Gryphon FPSO to maintain operational efficiency and safety standards.

• Facilitated riser and clamp installation to ensure effective diver support during AWP 10 & 11 operations.

• Conducted inlet grill replacement on FPSO using industry-standard tools and safety protocols to enhance equipment performance.

• Ensured successful completion of Gulfaks cable laying and burial projects, enhancing operational safety.
  Achieved compliance with cable depth of burial standards through thorough survey management.
  Delivered effective scour assessment surveys and remediation solutions, minimising environmental impact.

• Delivered successful outcomes for blane remediation project via efficient diver-less connection seal changeout.
  Achieved project objectives through effective collaboration with third party representative.
  Realised operational improvements by streamlining communication and coordination efforts.

• Utilised advanced surveying techniques and equipment to mobilise and complete pre-lay surveys for Goliat pipeline route.

• Achieved successful completion of inaugural work class ROV baseline platform and pipeline survey.
  Delivered comprehensive seabed and scour surveys for enhanced insights.
  Acquired accurate MBES, side scan sonar, CP, and UT readings to support project objectives.

• Executed worldwide ROV surveys and inspections, achieving high standards of service delivery.
  Delivered work-class ROV projects, enhancing operational efficiency and client satisfaction.
  Drove successful project outcomes through effective teamwork and strategic planning.
• Oversaw daily operations, ensuring compliance with health and safety regulations.
• Monitored worker behaviours and enforced standards for consistent safety protections.
• Fostered a positive working environment, encouraging teamwork and collaboration.
• Planned and communicated daily manufacturing tasks and targets.
• Facilitated communication between senior management and staff, acting as a liaison.
• Developed and implemented operational procedures, significantly improving workflow and productivity.
• Reviewed and updated safety protocols, minimising risk of accidents in the workplace.

• Participated in salvage operations, employing advanced lifting techniques to recover submerged objects with minimal environmental impact.
• Facilitated the removal of underwater obstructions to ensure unimpeded progress of marine construction and repair projects.
• Operated sophisticated diving equipment, including mixed gas systems, for deep water operations in various sea conditions.
• Utilised underwater welding and cutting techniques to perform critical repairs on subsea pipelines, ensuring operational integrity.
• Performed risk assessments for dive operations, identifying potential hazards and implementing mitigating measures to prevent accidents.
• Implemented decompression procedures effectively, minimising health risks associated with deep-sea diving activities.
• Led dive teams in complex commercial diving projects, fostering teamwork and ensuring adherence to project timelines.
• Collaborated with marine engineers on underwater installations, repairs, and maintenance of structures, demonstrating technical proficiency.