Liam Watson

This job role included working as part of a two man team refurbishing alloy wheels using specialist Equipment and paint/powder coating methods to produce untraceable repairs and colour changes to any style of alloy wheel. The process would involve bringing the customers car into the workshop, safely jacking up the car supported by stands and removing wheels to work on. I would then carefully strip the wheel of the tyres, ensuring no damage, balance weights and carefully any TPMS valves for the customers use after refurbishment. The wheels would then get dipped into an acid tank by hand. When ready they were lifted out, alkalised and then sand blasted using a wet vapour machine that blasts glass beads, sand grains and water at the same time, leaving a perfectly prepped finish. I would then carefully inspect each face, spoke and barrels of the wheels for damage, TIG weld up any cracks or deep Gashes & hand sand the face and lips down building up and taking away material where necessary, all to help achieve an untraceable finish. Wheels were then de-gassed in a walk-in oven, pulled out and primed using state of the art powder coat machines & Technology. I would then set up the hand spray machines for base and top coat. We bought the paints pre-mixed to keep turnover times down. I would then powder coat lacquer or hand spray it depending on the type of job I was doing. I then carefully mounted the tyres back on, replaced valves and balanced the wheels before finally installing them back on the car ready for the customer to collect.

I also was trained in diamond cutting wheels using a state of the art machine, wheels were prepped repaired and primed & painted, diamond cut & finally back to get lacquered. I was also trained in un-buckling wheels using heat and a nematic press machine.

Highlighted Skills:

• Powder coating & wet paint spraying
• Attention to detail & taking pride in my work
• Worked under no supervision, showing self-motivation and initiative.
• Application of lacquers using different techniques
• Diamond cut machine training, operation & maintenance
• Hand spray gun operation & maintenance
• Safely using toxic chemicals to strict H&S Rules
• Organised workspace for efficiency and safety compliance.
• Expertise in various spray techniques for superior finishes.
• Inspected final paintwork identifying any imperfections in finish
• Prioritised tasks efficiently during peak times to meet demanding deadlines.
• Performed detailed masking tasks to protect non-painted areas.
• Enhanced customer satisfaction by resolving queries efficiently.
• Prepared surfaces for painting to ensure long-lasting results.
• Delivered exceptional service for increased customer loyalty.

• Company Overview: www.stages.co.uk

• With over 35 years experience providing stages and supporting structures to festivals, concerts, tours and sporting and corporate events. Also specialising in the design and installation of temporary / semi-permanent buildings, film or TV studio, corporate space for a product launch or exhibition, music venue, party venue or broadcast studio. From 20m span to 70m span steel framed temporary structures.

• I was trained to be one of the main wet paint spray technicians which quickly evolved into team manager after showing strong skills in both painting and being able to work well with a team. I was based at Longcross film studios in surrey. Working 14 consecutive 12-hour shifts and then having 2 days off. I helped with and oversaw all prep and spray production In the business. I was trained at a professional level to operate Graco industrial spray machines to coat varying metal works used for all of the varying staging structures and movie warehouses. This ranged front intricate angled joining brackets to massive steel I-Beams, they were all painted by my team and I often working under tight schedules to meet deadlines for events so my role as manager was very important. I liked to keep morale high with a focused environment I'm trained on 2 pack paint use, Oxide paint, epoxy paint, Graco spray paint machines full use and maintenance.

• I also toured the UK with Serious during the festival season when the paint work was complete, helping out on thee ground to set up some of the biggest main stages across the country. This was mainly scaff and grounds work erecting steel structures with rigging and climbing too.

Highlighted Skills:

• Paint Spraying to a Professional Industrial Level
• Mixed and handled chemicals according to instructions and safety guidelines.
• Assured longevity of coatings with thorough surface preparation.
• Cleaned nozzles after every use maintaining cleanliness and enhancing durability.
• Kept workspace organised thereby increasing efficiency during operations.
• Inspected finished jobs thoroughly, guaranteeing satisfaction.
• Adjusted pressure valves properly to control the flow rate of paints.
• Calibrated equipment regularly for accurate performance.
• Maintained optimal condition of tools to guarantee precision work.
• Handled minor repairs on equipment promptly, reducing downtime significantly.
• Attended regular training sessions staying updated with latest spraying techniques.
• Used protective gear appropriately to maintain personal safety whilst at work.
• Managed paint inventory effectively minimising waste and saving cost.
• Performed disassembly of sprayers for in-depth cleaning, prolonging lifespan.
• Prepared surfaces for painting by cleaning, sanding and filling.
• Provided a secure environment by adhering to health and safety guidelines.
• Supervised project timelines for timely completion.
• Liaised with suppliers to ensure timely deliveries.
• Coordinated cross-departmental collaboration for improved workflow.
• Maintained inventory control, reduced stock shortages.
• Delegated tasks efficiently to maximise productivity.
• Fostered a positive work environment with regular team-building activities.
• Enforced safety regulations to reduce workplace accidents.

• Starting as a welding assembly operative which involved stud welding to secure surrounding panels and parts on industrial gas and electric heaters. After showing decent dedication to the company I got positioned onto the factories paint line. This involved fast paced multitask management of an industrial sized powder coat line. Physically hanging up different metal parts from stainless to Galv to be coated, whilst also being able to use both control panels ensuring a smooth workload to produce high quality parts in varying RAL powder coat colours.

Highlighted Skills:

• Ensured uniform application of powder by controlling electrostatic gun settings accurately.
• Contributed ideas during team meetings that improved overall efficiency of the painting process.
• Prepared surfaces for coating to ensure optimal adhesion and durability.
• Inspected finished pieces with keen attention to detail for quality assurance.
• Performed routine maintenance on equipment, ensuring optimal performance.
• Ensured proper curing of coated items in oven to create durable finish.
• Hung parts on line efficiently, maintaining work flow during shifts.
• Maintained clean workspace, improving productivity and safety.
• Collaborated closely with team members, promoting efficient workflow in the workshop.
• Documented daily production activities diligently for record keeping purposes.
• Adhered strictly to production schedules, meeting project deadlines consistently.

• Working 8-hour days 1 on 1 with my boss. General building & repair work of every kind including Garden Landscaping.
• Performed roofing installations, major element in new builds or renovations.
• Adhered to local building regulations throughout all phases of construction ensuring legal compliance.
• Ensured customer satisfaction by delivering projects on time and within budget.
• Utilised power tools proficiently whilst maintaining strict safety protocols.
• Delivered high-quality carpentry work for unique interior design elements.
• Looked after tools, materials and equipment, making available for use when required.

• Responsible for managing the bar, Pouring & making drinks, waitering for customers and getting stuck into the prep and kitchen duties whenever the help was needed. Stock taking and being responsible for the till

• Working in a small kitchen in a team of 4 to deliver some of the best food and service in Somerset. We came runners up in "Taste of the West" and had a 5-star rating all round. It was a gastro/high-end restaurant/pub with all international ingredients. We would have 30 for lunch and 50/60 for dinner every day and I was the only KP for our service shifts. Very fast paced and intense kitchen work but I loved it! It felt great to finish knowing the good we've done for the local community! I was also responsible for small site maintenance and repairs, gardening and interior decorating whenever needed. I even helped on the bar when needed due to prior experience.

• I worked in many places mainly including Somerset County cricket ground, weddings and different events. Whilst working at these places I would fulfil a variety of roles such as waitering, managing the bar, pouring drinks and helping to manage the event itself.