Jack Potts
Summary
Seasoned multi-skilled technician with a strong background working on wind turbine projects across Europe and the United States. Proficient in servicing and maintaining Siemens, Gamesa, Vestas, Nordex, and GE turbines in both onshore and offshore environments. Highly adaptable and safety-oriented professional, with excellent organizational and leadership abilities. Comprehensive knowledge of health and safety protocols, adept at following company regulations to ensure a secure working environment for all.
Overview
8
8
years of professional experience
1
1
Certification
Work History
Yoke Operator-Troubleshooter- Site Representative.
Enabl UK
Denmark, UK
03.2025 - Current
- Completed simulator training, enhancing technical competency.
- Performed service and maintenance on mechanical and electrical components.
- Studied RAMS and scope of work procedures to ensure adherence to standards.
- Troubleshooting issues effectively to minimize downtime to reach client deadlines.
- Conducted SAT testing to verify system functionality.
- Assisted with installation of WTG components
- Assisted team members with tasks, consistently meeting targets.
- TGM4, MBY
Enabl TGM Operator-mech Float V164 Blade Campaign
LSP Renewables/GWS/Vestas
Ireland, Europe
04.2023 - 03.2025
- Conducted crane boom walk inspections, including the checking of all pins in permanent and temporary fixtures on the tag line housing at each offshore location
- Supported the completion of major component lifts on the ship
- Completed pre use check sheets prior to use
- Serviced and maintained all mechanical parts
- Load cell testing
- Brake tests
- Remained vigilant and confident working in all kinds of weather conditions
- Removed and replaced V164 blades using heavy lift special tooling and blade gripper (BTT)
- Followed risk assessments and method statements (RAMS) as well as permits, whilst attending toolbox talks
- Stretched and de-stretched blades
- Assessed customer needs and suggested relevant products or services to meet needs.
- Carried out assignments under short notice and outside of normal hours.
TFA/Site Supervisor SG145 5MW (Hand Hills)
GEV Wind Power / SGRE
Alberta, Canada
10.2022 - 04.2023
- Supervised teams, communicated work scopes and schedules to ensure timely completion of tasks.
- Monitored safety compliance with Alberta's regulations through strict enforcement of all stop policies.
- Delivered safety talks to promote adherence to procedures and enhance safety performance.
- Maintained an updated site diary, documenting progress, delays, and producing handover sheets.
- Assisted with inspections and addressed snagging issues based on client feedback from walk-downs.
- Supported troubleshooting for tooling including pitch, turning gear, dan-hydra, and blade gripper.
- Monitored installation of components to ensure compliance with Siemens specifications by main contractor.
- Conducted daily task reviews to mitigate risks and ensure safe operations.
- Closed off any out standing NCRS
Offshore MCE technician HALIADE-X Turbine
Endiprev uk
Saint-Nazaire, France
08.2022 - 10.2022
- Signed off on all RAMS and permits while adhering to LOTO procedures.
- Attended TBT sessions and safety stand-downs to promote workplace safety.
- Utilized full Offshore Mandatory PPE for all operations.
- Operated Walk to Work Systems in conjunction with CTV and SOV Transfer.
- Prepared Hydec NC1/NC1 and safely lifted all 27450W to the Nacelle using lifting aids.
- Conducted REP/VLF tests to ensure compliance with safety standards.
- Participated in safety talks and pre-task briefings to enhance team awareness.
Nacelle Technician (Pre-Assembly) Vestas V164
Boston Energy
Hartlepool
09.2021 - 08.2022
- 3 months' maintenance schedule
- Checked all serial numbers and dates of safety equipment including fire extinguishers, stretchers and logged them on the E-Cifs
- Recorded the temperature and testing pressure of nitrogen accumulators inside the hub.
- Followed a strict Lean process.
- Adhered to Risk Assessments & Method Statements.
Special Operations Nordex
Boston Energy
Hartlepool
06.2021 - 08.2021
- Attended TBT alongside take five and pre task briefs.
- De torque and torquing scope.
- Pitching the blades 360 degrees, ping testing every bolt, pitching it back to keep blade alignment.
- Assisted with commissioning of WTG under AT/LAT.
- Closed NCRS.
- Re-stretching of new bolts to correct NM.
- Following safe LOTO procedures.
- Adhering to specific work instructions
Pre Assembly tech V164
Boston Energy
Hartlepool
12.2020 - 08.2021
- Executed preparation of tower sections with efficiency and precision.
- Conducted thorough pre-lift checks and secured heavy lift yokes.
- Successfully landed base towers onto tower stands.
- Transported tower sections to designated load-out area.
- Assisted installation of Dolphin lift to enhance operational capabilities.
- Installed damper sections to improve structural integrity.
- Performed repairs on ladder rails to ensure safety compliance.
- Applied torque and stretching techniques following strict isolation procedures.
WTG technician MCE scope, SGRE 3.2MW, 4.0MW, 2.3MW
CF Wind LTD
Europe
04.2019 - Current
- Led pre-installation, main installation, and mechanical finishing as Lead Technician.
- Maintained 100% inventory accuracy by updating daily logs and materials used.
- Conducted pre-lift checks on lifting equipment to ensure operational safety.
- Adhered to HSE regulations, including signing Risk Assessments and Method Statements.
- Assisted in component erection.
- Performed banking of cranes and machinery.
- Executed torque and tensioning procedures to meet technical specifications.
- Facilitated client walk downs and snagging to address project requirements.
Automotive Technician
Unipress UK
04.2017 - 04.2019
- Time management
- Quality control
- Spot welding
- Working on a busy production line
- Mechanical systems
- House keeping
- Troubleshooting
- Assembling car parts for Renault and Nissan
Skills
- Work ethic and dedication
- Team leading capabilities
- Solution-oriented mindset
- Health and safety adherence
- Multitasking proficiency
Certification
- Enabl Level 4 TGM
- Avant Lift Training
- Power Climb Lift Training
- GWO Sea Survival
- GWO BTT
- GWO Working at Heights
- GWO First Aid
- GWO OGUK Medical (Chester Step)
- GWO Fire Awareness
- GWO Manual Handling
- GWO Boat Transfer
- GWO Slinger Signaller (Banksman)
- OSHA 10 General Health & Safety Industrial Training
- GWO Enhanced First Aid
- TOS Training
- GWO Hub Rescue
- ENG1 Medical
- Martine Safety Awareness
- VESTAS STAT
- ESTS Electrical Worker Canada
- Public Liability Insurance
- Medical and Health Insurance
- Contractor Insurance
- Avanti Dolphin Lift Installation
- SGRE E Learnings
References
References available upon request
QUALIFICATIONS
Full UK drivers licence
Timeline
Yoke Operator-Troubleshooter- Site Representative.
Enabl UK
03.2025 - Current
Enabl TGM Operator-mech Float V164 Blade Campaign
LSP Renewables/GWS/Vestas
04.2023 - 03.2025
TFA/Site Supervisor SG145 5MW (Hand Hills)
GEV Wind Power / SGRE
10.2022 - 04.2023
Offshore MCE technician HALIADE-X Turbine
Endiprev uk
08.2022 - 10.2022
Nacelle Technician (Pre-Assembly) Vestas V164
Boston Energy
09.2021 - 08.2022
Special Operations Nordex
Boston Energy
06.2021 - 08.2021
Pre Assembly tech V164
Boston Energy
12.2020 - 08.2021
WTG technician MCE scope, SGRE 3.2MW, 4.0MW, 2.3MW
CF Wind LTD
04.2019 - Current
Automotive Technician
Unipress UK
04.2017 - 04.2019