Duncan Martin

• Applied safe work methods across all phases of installations.
• Fabric maintenance work on Handrails,replacing decks and general upkeep.
• Completed new installations, repairs and maintenance work on interior and exterior piping systems.
• Inspected workplace equipment to identify maintenance requirements.
• Operated grinders, clamps and drills to safety standards.
• Detected welding defects and performed required repairs.
• Operated welding tools and equipment safely to minimise error and risk.
• Fabricated component pieces and built structures from start to finished product.

This is an ongoing decommissioning work scope, mostly involving capping off pipework.

• Utilised welding equipment and other hand tools with utmost safety and efficiency.
• Fabric maintenance to keep up safety standards.
• Expertly installed a range of metal, galvanised and steel pipes in line with project deadlines.
• Operated grinders, clamps and drills to safety standards.
• Created heavy and light steel fabrications to exact blueprints.
• Fabricated component pieces and built structures from start to finished product.

• Applied safe work methods across all phases of installations.
• Prepared pipelines, pipework preparation and fitting.
• Steel fabricating.
• Operated grinders, clamps and drills to safety standards.
• Identified welding defects and completed swift, quality repairs.
• Used flat, horizontal, vertical and overhead positions in welding.

• Threaded pipes using specified machinery.
• Measured structural parts or assemblies to determine dimensional requirements.

Including fabricating, assembling, and installing.

• Interpreted ISO drawings and mechanical specifications with accuracy.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Measured cut and prepped pipework butt's for welding.

This was on a pre-shutdown scope.

• Managed movement of materials and equipment to different job sites.
• Unloaded and stored material deliveries carefully to eliminate material damage.
• Applied safe work methods across all phases of installations.
• Interpreted ISO drawings and mechanical specifications with accuracy.

The work involved changing out valves and spools on the sea chests and fire pumps.

The work was carried out on schedule and without incident.

This was a pre-shutdown scope involving preparing the various job sites for the shutdown of the rig.

• Managed movement of materials and equipment to different job sites.
• Interpreted ISO drawings and mechanical specifications with accuracy.

Equinor Marinor

This was a three-week shutdown carried out on time and without incidents.

• Facilitated timely project completion by liaising with colleagues and contractors effectively.
• Applied safe work methods across all phases of installations.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Measured and cut pipework, brackets and supports with exceptional precision.

Total Elgin and North Alwin

Those were general pipefitting and plating scops, including pipe supports, replacing pipework,and replacing steelwork.

General fabric mantinance.

• Applied safe work methods across all phases of installations.
• Maintained high standards of health and safety in all field and workshop-based jobs.
• Cut and handled metal and associated materials with care to eliminate damage.
• Fitted pipework and fabricated pipe supports.

Total Culzean

I was the nightshift pipefitter helping the mechanical fitters to change out PSVs and changing out one of the turbines.

• Applied safe work methods across all phases of installations.
• Maintained high standards of health and safety in all field and workshop-based jobs.

Total North Alwin

This work comprised changing out the seawater pipework during a partial shutdown of the rig and was carried out in the time allotted .

• Applied safe work methods across all phases of installations.

This was a three-week shutdown on the Armada Kraken.

The work involved valve changeouts and re-routing new pipework.

• Applied safe work methods across all phases of installations.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Facilitated timely project completion by liaising with colleagues and contractors effectively.

This is as a shut-down foreman on the Total North Alwyn

• Monitored progress to determine timely completion aligned to detailed design specifications.
• Upheld thehighest quality standards in various tasks to achieve exceptional finished-project results.
• Maintained exceptional levels of health and safety in line with guidelines for continued staff well-being and company compliance.

This was fitting flexible hoses from the Valaris Rowan Norway to the BP Mungo platform for fire cover when the Norway will be drilling for new wells.

• Managed movement of materials and equipment to different job sites.
• Expertly installed arange of metal, galvanised and steel pipes in line with project deadlines.
• Measured structural parts or assemblies to determine dimensional requirements of replacement parts.
• Applied safe work methods across all phases of installations.
• Bolted, clamped and tack-welded parts to secure components before welding.
• Interpreted ISO drawings and mechanical specifications with accuracy.

This work was to update the Total Gas Plant in order to operate under a lower volume of Gas.

• Monitored contractor's progress to ensure timely completion aligned to detailed design specifications.
• Supervised specialist sub-contractors, providing thorough induction and signing off compleated work.
• Maintained exceptional levels of health and safety in line with Total guidelines for continued staff wellbeing and company compliance.
• Identified project issues quickly to minimise delays.
• Liaised with coordinating construction teams to synchronise workflows.
• Supervised ongoing construction works, verifying against specifications.
• Maintained site health and safety compliance for safe, secure working environments.
• Briefed teams on daily task requirements to meet project targets.

This is on the Total Elgin.The work involves replacing the Hazardous drains pipework,cutting out penetrations through bulkheads and tanks for the new pipework and fitting new flanges for welding to the pipework.

This was on a pre-shutdown and shutdown on a shutdown; my duties included being a Performing Authority controlling all work sites.

I completed the work on time and without any lost time accidents.

• Monitored progress to determine timely completion aligned to detailed design specifications.
• Managed conflict resolutions to encourage professional relationships.
• Supervised specialist sub-contractors by providing thorough induction and delegating tasks.
• Maintained exceptional levels of health and safety in line with guidelines for continued staff well-being and company compliance.
• Created and maintained construction schedules to determine work shifts.
• Formulated and submitted project reports to supervisor.

This was on the Total North Alwyn.

The work involved replacing separators,pipework and then pipe supports.

This was the first shutdown on the Total Culzean and was completed on time and without any accidents.

• Interpreted ISO drawings and mechanical specifications with accuracy.
• Measured structural parts or assemblies to determine dimensional requirements of replacement parts.
• Inspected equipment and structures to determine lifting and rigging requirements.
• Expertly installed range of metal, galvanised and steel pipes in line with project deadlines.
• Maintained high standards of health and safety in all field and workshop-based jobs.
• Applied safe work methods across all phases of installations.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.

This was on the Total Grifon and was a 3-week trip.

I was the P.A. for this role.

• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Expertly installed a range of metal, galvanised and steel pipes in line with project deadlines.
• Applied safe work methods across all phases of installations.

• Handled piping systems, including fabricating, assembling, installing and maintaining.
• I was a Performing Authority on the Ninians
• I worked on the Ninians, the Fortys, the Beryls, and the Tiffany
• Obtained documents, clearances, and certificates.
• Managed movement of materials and equipment to different job sites.
• This work was offshore.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Facilitated timely project completion by liaising with colleagues and contractors effectively.
• Inspected equipment and structures to determine lifting and rigging requirements.
• Expertly installed arange of metal, galvanised and steel pipes in line with project deadlines.
• Maintained high standards of health and safety in all field and workshop-based jobs.
• Bolted, clamped and tack-welded parts to secure components before welding.
• Applied safe work methods across all phases of installations.

This was on the Clair Ridge Project offshore where I was involved with the leak testing,fabricating pipework,fitting new spools and valves.

• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Measured and cut pipework, brackets and supports with exceptional precision.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Owned various aspects of pipe work installation and general mechanical work.
• Facilitated timely project completion by liaising with colleagues and contractors effectively.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Expertly installed range of metal, galvanised and steel pipes in line with project deadlines.
• Maintained high standards of health and safety in all field and workshop-based jobs.
• Commissioned commercial boilers and pipework systems in line with company targets.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Applied safe work methods across all phases of installations.

I was offshore on the Fortys Charly and the Heather doing shutdown work involving replacing pipe spools and valves.

• Expertly installed range of metal, galvanised and steel pipes in line with project deadlines.
• Supported staff health and safety with target of zero accidents and LTIs.
• Maintained high standards of health and safety in all field and workshop-based jobs.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Applied safe work methods across all phases of installations.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Measured and cut pipework, brackets and supports with exceptional precision.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Measured structural parts or assemblies to determine dimensional requirements of replacements parts.

This work involved working in whisky distilleries doing maintenance on different sites.

• Threaded pipes using specified machinery.
• Managed movement of materials and equipment to different job sites.
• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Measured and cut pipework, brackets and supports with exceptional precision.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Measured structural parts or assemblies to determine dimensional requirements of replacement parts.
• Worked on sites across UK on new-build, maintenance and overhaul work.
• Commissioned commercial boilers and pipework systems in line with company targets.
• Controlled weld shrinkage and prevented distortion by applying optimally balanced welding sequences.
• Applied safe work methods across all phases of installations.

I started for Wood Group on the Andrew Area Development Project. This was the B.P. Andrew oil rig.

• Involved movement of materials and equipment to different job sites.
• Assisted with document organisation as a Performing Authority and safety on site.
• I was then Add Hoc between different oil rigs in the North Sea
• The North Alwin, B.P.Magnus, the F.P.S.O.Anasuria, the Shell Shearwater and the Ninians.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Measured and cut pipework, brackets and supports with exceptional precision.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Measured structural parts or assemblies to determine dimensional requirements of replacement parts.
• Expertly installed arange of metal, galvanised and steel pipes in line with project deadlines.
• Supported staff health and safety with atarget of zero accidents and LTIs.
• Maintained high standards of health and safety in all field and workshop-based jobs.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Applied safe work methods across all phases of installations.
• Controlled weld shrinkage and prevented distortion by applying optimally balanced welding sequences.
• Owned various aspects of pipework installation and general mechanical work.

I was working on the Fortys and the Beryls, which are Apache owned.

This work was for everyday maintenance and also for shutdowns.

• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Measured and cut pipework, brackets and supports with exceptional precision.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Owned various aspects of pipe work installation and general mechanical work.
• Facilitated timely project completion by liaising with colleagues and contractors effectively.
• Inspected equipment and structures to determine lifting and rigging requirements.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Expertly installed range of metal, galvanised and steel pipes in line with project deadlines.
• Supported staff health and safety with target of zero accidents and LTIs.
• Maintained high standards of health and safety in all field and workshop-based jobs.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Applied safe work methods across all phases of installations.
• Controlled weld shrinkage and prevented distortion by applying optimally balanced welding sequences.
• Threaded pipes using specified machinery.
• Managed movement of materials and equipment to different job sites.

This was a four-week job on a carbon fibre factory shutdown.

• Threaded pipes using specified machinery.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Owned various aspects of pipework installation and general mechanical work.
• Measured structural parts or assemblies to determine dimensional requirements of replacement parts.
• Facilitated timely project completion by liaising with colleagues and contractors effectively.

This was on a new build Tesco store.

• Supported clients in improving operations and resolving issues to deliver top-notch customer service.
• Worked to deadlines and timescales and liaised with managers and customers for schedule changes.
• Maintained accurate property and file records on repair works and progress on jobs.
• Diagnosed and repaired faults affecting theproper performance of heating systems.
• Conducted boiler servicing, diagnosing faults and replacing defective parts.
• Took steps to understand workplace hazards to comply with safety rules and procedures.
• Completed all works to high standards in line with company and industry requirements.
• Strived to finish allocated workload and meet targets as agreed with line manager.

I was working for Isleburn at Nigg Bay we were building cranes for an offshore oil rig in Brazil.

This was in the Global fabrication shop in Invergordon making up spools from isometric drawings to be fitted to a drill rig that was tied up in Invergordon.

Due to the downturn in work in Scotland, I had to travel for work. This included

England on power stations,the T5 tunnel for Heathrow,RAF,Army and Naval Bases, etc.

In the Netherlands, I was based in the town of Vlissingen, where I worked in the Herema yard,in shipyards and in various Engineering workshops.

I made up sections of a bridge linking Sweden to Denmark in Sweden.

Also, in a shipyard.

Northern Ireland in Harland and Wolfe

I spent much time in the Republic of Ireland on new water treatment plants.

• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
• Oversaw [Number] apprentices, answered questions and provided feedback on work.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Measured and cut pipework, brackets and supports with exceptional precision.
• Unloaded and stored material deliveries carefully to eliminate material damage.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Measured structural parts or assemblies to determine dimensional requirements of replacement parts.
• Measured structural parts or assemblies to determine dimensional requirements of replacement parts.
• Owned various aspects of pipe work installation and general mechanical work.
• Facilitated timely project completion by liaising with colleagues and contractors effectively.
• Handled or escalated customer queries, concerns or complaints appropriately.
• Inspected equipment and structures to determine lifting and rigging requirements.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Coached and mentored junior team members, improving overall team productivity and performance.
• Expertly installed range of metal, galvanised and steel pipes in line with project deadlines.
• Utilised welding equipment and other hand tools with utmost safety and efficiency.
• Supported staff health and safety with atarget of zero accidents and LTIs.
• Commissioned commercial boilers and pipework systems in line with company targets.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Worked on sites across theUK on new-build, maintenance and overhaul work.
• Worked on sites across UK on new-build, maintenance and overhaul work.
• Applied safe work methods across all phases of installations.
• Controlled weld shrinkage and prevented distortion by applying optimally balanced welding sequences.
• Maintained high standards of health and safety in all field and workshop-based jobs.

Canada, I worked on the Oil Sands Project in Alberta at Fort MacMurray.

• Threaded pipes using specified machinery.
• Managed movement of materials and equipment to different job sites.

I worked between the oil yards of Barmac at Nigg Bay and MacDermids in Ardersear.

We were building Jackets,Topsides and Modules for the North Sea

• Threaded pipes using specified machinery.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Measured and cut pipework, brackets and supports with exceptional precision.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Measured structural parts or assemblies to determine dimensional requirements of replacement parts.
• Expertly installed arange of metal, galvanised and steel pipes in line with project deadlines.
• Utilised welding equipment and other hand tools with utmost safety and efficiency.
• Maintained high standards of health and safety in all field and workshop-based jobs.
• Bolted, clamped and tack-welded parts to secure components before welding.
• Applied safe work methods across all phases of installations.
• Controlled weld shrinkage and prevented distortion by applying optimally balanced welding sequences.

This work was for companies like Total,Britoil and Shell, to name some.

We were building Sub Sea Spiders,Turrets for F.P.C.Os Modules Jackets, etc.

• Threaded pipes using specified machinery.
• Managed movement of materials and equipment to different job sites.
• Prepared pipelines, pipework preparation and fitting to high standards and ahead of agreed timescales.
• Measured and cut pipework, brackets and supports with exceptional precision.
• Interpreted ISO drawings and mechanical specifications with accuracy.
• Facilitated timely project completion by liaising with colleagues and contractors effectively.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Expertly installed a range of metal, galvanised and steel pipes in line with project deadlines.
• Utilised welding equipment and other hand tools with utmost safety and efficiency.
• Maintained high standards of health and safety in all field and workshop-based jobs.
• Bolted, clamped and tack-welded parts to secure components before welding.
• Applied safe work methods across all phases of installations.